Job Vacancies at Nlightin Nigeria, Oil and Gas Company

Job Vacancies at Nlightin Nigeria, Oil and Gas Company



NLIGHTIN is a reputable oil and gas service company offering a wide range of services and solution in oil and gas business in construction, consulting and procurement.

We are recruiting to fill the position below:

Job Title: Welding Inspector

Location: Lagos

Responsibilities
Welding Activities:

Raw Material Inspection:

Check the welding consumable as per WPS

Check the bevel angle, root gap face as per WPS

Check the Fit-up root gap and misalignment as per WPS

Check the root pass and hot pass amps and volts

After completing fill and cap check visual inspection

For visual inspections, request client and submit the visual inspection report

Request NDT for the weld joint

After completing, request client to review the film

After the film review, submit all the reports for client’s signature

Release for further activities

Safety:

Ensure that the Safety policies and procedures are understood and adhered to as far as is reasonably practicable in order to ensure a safe working environment.

Other:

Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems.

Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company.

Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment.

Computer Skills:

To perform this job successfully, an individual should have complete knowledge of Microsoft Word, Excel.

Competencies

To perform the job successfully, an individual should demonstrate the following competencies.

Analytical – Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures.

Problem Solving – Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.

Project Management – Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities.

Written Communication – Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information.

Organizational Support – Follows policies and procedures; Completes administrative tasks correctly and on time; supports organization’s goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity.

Planning/Organizing – Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans.

Quality – Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.

Ethics – Treats people with respect; Keeps commitments; inspires the trust of others; Works with integrity and ethically; Upholds organizational values.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/ or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Welding:

AWI (CWI, SCWI)

CSWIP (3.1, 3.2)

Painting:

SSPC (grade 3, 2, 1)

NACE (level 1, 2, 3)

Job Title: Blaster/Painter

Location: Lagos

Description

Works as directed, preparing surfaces for final coating applications, through masking, degreasing, containment, power tool, thinner wiping, brushing and rolling, spray painting and blasting.

Duties

Assist Blaster/Painters with operating various tools in accordance with company’s safety policy.

Set up all blast pots, route blast lines and lighting in accordance with OSHA standards.

Inspect all lines and pots before and after each shift.

Prepare and maintain equipment for blast and coating operations.

Clean and maintain work area.

Wear the personal protective equipment prescribed by posted signs, written instructions and work permits.

Participate in company safety programs.

Report all accidents and near misses involving self, company vehicles, or other job personnel to manager immediately

Education

Ordinary National Diploma preferred.

Experience/Qualifications:

Must possess a T.W.I.C. card (Transportation Worker Identification Card)

Must be available to work offshore on a 14/7 rotation.

Must be able to pass a water survival class to board helicopter transportation and use swing rope to board boat or platform.

Must be able to pass BOSIET

Job Title: Electrical Technician

Location: Lagos

Responsibilities

Assists In operations by maintaining all electrical equipment

Install, maintain and troubleshoot medium voltage (220-480 VAC) systems, generators, distribution, breakers, conduits, cables, motor starters and transformers

Troubleshoot and repair Low Voltage (12v to 48v) systems

Read technical documentation including Piping & Instrument Diagrams, loop drawings, wiring schematics, and specifications

Maintain and repair general production platform equipment such as galley equipment, communication systems, fire and gas systems, and platform lighting

Qualifications

3+ years of experience offshore Electrician

Working knowledge of the NFPA (NEC), API

Ability to travel by helicopter or boat and use swing rope.

Job Title: Welding Technician

Location: Lagos

Responsibilities

Ensure that the necessary materials, equipment, parts, procedures and qualifications are according to the WOP

Ensure that the work is carried out according to agreed specifications

Ensure that the work is delivered according to agreed requirements

Ensure the use of materials and support substances according to specific requirements

Ensure that the workshop procedures are followed

Ensure that the workshop equipment, and facilities are suitable and in operational condition

Ensure that WOP is followed, filled in with necessary information, contain correct documentation and are signed after performed work.

Reporting all non-conformances and malfunctions

Promote and ensure compliance to company and regulatory EHS requirements & expectations at all time

Promote and ensure compliance to company and regulatory Quality management systems at all time

Qualifications/Requirements

Proven 7 years relevant experience

Be able to work in a busy environment and handle pressure

Experience working with procedures and documentation

Being able to read schematics, drawings and BOM (bill of materials)

Valid health certificate for workshop operations

Able to comply with customer requirements, an evaluation that is based on the product / structure’s complexity, or out of the requirements for safety, environment and property

Desired Characteristics:

Trade school and/or relevant certificate of apprenticeship

Subsea/Surface background preferred experience in assembly and testing.

Welding cert. for method SAW / GTAW / GMAW / FCAW.

Prepared to work as part of a team or individually when required

Deadline: 21st October, 2019.

How to Apply
Interested and qualified candidates should send their CV to: [email protected] clearly indicating the “Job Title” as subject of your mail.

Post a Comment

0 Comments